3.0mm 24 Cores Fiber Optic MTP MPO LC Multimode OM3 Breakout Cable

Product Detail

Technical Information:
ALTEK's MPO / MTP® Breakout Cable Assemblies, using the high density cable and MPO / MTP® connector, utilizing fanout kit to assemble from trunk cable to generic fiber optic connectors such as LC, SC, FC, ST, MTRJ, etc. Available in 8/12/24/48 fibers versions as well as multi-mode (62.5/125µm , 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and Single-mode (G652D, G657A1 etc.) fiber types.




Features:
? Factory terminated & tested with guaranteed quality;
? High density to dramatically save space;
? Optimize network performance;
? The best solution covers all fiber optic cabling needs in all areas of Data Center.




Application:
? Data Switches and Routers;
? Trunk Backbone to Rack.
? Test Equipment.







Specifications and Dimensions:

Parameter		Single-mode			Multi-mode
Basic	Fiber connector	FC, SC, LC, ST, MU, MTRJ, MPO
	Ferrule End-face	PC	UPC	APC	UPC
	Insertion Loss	=0.2dB	=0.2dB	=0.3dB	=0.3bB
	Return Loss	=50dB	=55dB	=60dB	=35dB
	Ceramic Ferrule Specification	125.5um concentricity deviations:  <=1um			127um concentricity deviations:<=3um
	Suitable Fiber	9/125um			50/125um,62.5/125um
End-face Geometry	Radius of Curvature	7~25mm		5~12mm	N/A
	Fiber Protrusion	=50nm		=100nm	N/A
	Fiber Under Cut	=100nm		=100nm	N/A
	Apex offset	=50um
Mechanical	Exchangeability	=0.2dB
	Salt Spray	=0.1dB
	Drop	=0.2dB(1.5M, 5 drops)
	Vibration	IL =0.2dB(550Hz, 1.5mm)
	Repeatability	= 0.1dB(1000 times)
	Durability	> 1000 times
	Operating Temperature	-40? ~ +85?




The Basic Division of MTP® Connectors:

Type and Color Code Connectors	Insertion Loss (IL)	Optical Return Loss (RL)	Operating Temperature
Single-mode MTP® Elite® Connector	0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Single-mode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Multimode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3	> 20 dB (0°Flat Polished)2,3	-40? to 75?
1 IL test according to IEC 61300-3-4; 2 RL test according to IEC 61300-3-6; 3 Tested with proposed encircled flux launch condition on 50µm fiber & 850nm per IEC 61280-4-1.




Recommended buffer fiber and color-coded connectors:

Cable Type	Single-mode MTP® Elite® Connector	Single-mode MTP® Standard Connector	Multimode MTP® Elite® Connector	Multimode MTP® Standard Connector
Bare Ribbon	Mustard Color	Green Color	Aqua Color	Beige Color
Flat ribbon Cordage
Cable Ø 2.0mm
Cable Ø 3.0mm
Cable Ø 3.6mm
Cable Ø 4.5mm
Cable Ø 5.0mm
Cable Ø 5.5mm




Typical Applications and Wire Map:




Ordering Information:

Product Description	MTP/F/PC - LC/UPC/DX - OM3 - 12B - B2.0 - 1.5M/0.6M - LSZH - Aqua - A          1                    2               3         4        5              6                7            8      9
1 - Connector A	MTP/F/PC: MTP Female,PC polish; MTP/F/APC: MTP Female,APC polish; MTP/M/PC: MTP Male,PC polish; MTP/M/APC: MTP Male,APC polish;
2 - Connector B	LC/UPC/DX;LC/APC/DX;LC/UPC/SX;LC/APC/SX;LCP/UPC;LCP/APC; SC/UPC/DX;SC/APC/DX;SC/UPC/SX;SC/APC/SX;FC/UPC;FC/APC;ST/UPC
3 - Fiber Mode	OM1, OM2, OM3, OM4, OS2, G657A1
4 - Fiber Count&Type	12R: 12F Ribbon; 12BR: 12F Bare Ribbon; 12B: 12F Mini Round Cable
5 - Breakout Type	B2.0: 2.0 fan-out with splitter kit.
6 - Length	1.5M/0.6M: Cable total length1.5M, fan-out length 0.6M, etc.
7 - Cable Jacket Materials	LSZH/OFNP/OFNR
8 - Cable Jacket Color	Aqua (OM3,OM4) Orange (OM1,OM2), Yellow (SM).
9 - Polarity	A: Type A; B: Type B; C: Type C.