12 Fiber Optic MPO APC to MPO APC Singlemode OS2 Trunk Patch Cable Termination

Product Detail

Technical Information:
ALTEK's MTP® Trunk Multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data center and other high fiber environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MTP® Fan Outs, spanning MDA, HDA and EDA zones.




Benefits:
? Use to distribute some or all of the fibers in a trunk cable to other areas;
? Have pins (Male type) on one end of the connector, and no pin (Female type) on the other end;
? Choices of MPO/MTP® in 12 or 24-fiber connector interface;
? 100% tested;
? Fiber counts available in 12 / 24 / 36 / 48 / 72 / 96 / 144-fibers;
? Round & mini-core cable structure to eliminate bend sensitivity;
? Available in single-mode (9/125µm),multi-mode (50 or 62.5/125µm)and 10Gig fiber;
? Optional pulling eye design to fit for different installation environment.




General Connector Specification:






Other connectors' Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973;
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973;
FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973;
ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc.







The Basic Division of MTP® Connectors:

Type and Color Code Connectors	Insertion Loss (IL)	Optical Return Loss (RL)	Operating Temperature
Single-mode MTP® Elite® Connector	0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Single-mode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Multimode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3	> 20 dB (0°Flat Polished)2,3	-40? to 75?
1 IL test according to IEC 61300-3-4; 2 RL test according to IEC 61300-3-6; 3 Tested with proposed encircled flux launch condition on 50µm fiber & 850nm per IEC 61280-4-1.




Recommended buffer fiber and color-coded connectors:

Cable Type	Single-mode MTP® Elite® Connector	Single-mode MTP® Standard Connector	Multimode MTP® Elite® Connector	Multimode MTP® Standard Connector
Bare Ribbon	Mustard Color	Green Color	Aqua Color	Beige Color
Flat ribbon Cordage
Cable Ø 2.0mm
Cable Ø 3.0mm
Cable Ø 3.6mm
Cable Ø 4.5mm
Cable Ø 5.0mm
Cable Ø 5.5mm




Individually Plastic Bag With Testing Result:






High Density MTP®/MPO Cabling System In Dada Center:








Ordering Information:

Product Description	Lengths	Wire map
12 Fiber MPO/MTP female –female, OS2	0-80 Meter	Straight A Wire
12 Fiber MPO/MTP male-female, OS2	0-80 Meter	Straight A Wire
12 Fiber MPO/MTP male-male, OS2	0-80 Meter	Straight A Wire
12 Fiber MPO/MTP female –female, OS2	0-80 Meter	Straight B Wire
12 Fiber MPO/MTP male-female, OS2	0-80 Meter	Straight B Wire
12 Fiber MPO/MTP female –female, OS2	0-80 Meter	Pair flipped C Wire
12 Fiber MPO/MTP male-male, OS2	0-80 Meter	Pair flipped C Wire