100G 24F Array Fiber Optic MTP PC to MTP PC Connectors Multimode OM3 Trunk Patch Cable Terminate

Product Detail

Technical Information:
ALTEK's 24 f.o. MTP® Multimode patch cables are designed for data center solutions supporting the technologies as specified in the data center standards EN50173-5, ISO/IEC 24764 and TIA-942. The 24 fiber MPO patch cables support data center applications such as 10-40-100 Gigabit Ethernet, 4-8-16G Fibre Channel or InfiniBand. 12 fiber MPO female/female A (or C) wired patch cables are used to connect 24 fiber MPO cassettes. 24 fiber MPO female/female B wired patch cables are used as direct connect cables between 40/100GbE transceivers. MPO male/female patch patch cables enable a channel to be built with MPO female/female trunks and MPO coupler modules. When the MPO cable is connected with MPO, one of the MPO connectors must have pins. The 24 fiber MPO patch cables use 3.2mm round, indoor rated cable.




Benefits:
? Use to distribute some or all of the fibers in a trunk cable to other areas;
? Have pins (Male type) on one end of the connector, and no pin (Female type) on the other end;
? Choices of MPO/MTP® in 12 or 24-fiber connector interface;
? Available in single-mode (9/125µm),multi-mode (50 or 62.5/125µm)and 10Gig fiber;
? Optional pulling eye design to fit for different installation environment.




MTP® Connector Specification:

MTP no Guide Pins (Female)	MTP With Guide Pins (Male)
Two other clearly visible features are the noses and guide grooves (keys) on the center side. (Note: Female connector need to connect with male connector type.




Other connectors'Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973;
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973;
FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973;
ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc.




Specifications and Dimensions:

Parameter		Single-mode			Multi-mode
Basic	Fiber connector	FC, SC, LC, ST, MU, MTRJ, MPO
	Ferrule End-face	PC	UPC	APC	UPC
	Insertion Loss	=0.2dB	=0.2dB	=0.3dB	=0.3bB
	Return Loss	=50dB	=55dB	=60dB	=35dB
	Ceramic Ferrule Specification	125.5um concentricity deviations: <=1um			127um concentricity deviations:<=3um
	Suitable Fiber	9/125um			50/125um,62.5/125um
End-face Geometry	Radius of Curvature	7~25mm		5~12mm	N/A
	Fiber Protrusion	=50nm		=100nm	N/A
	Fiber Under Cut	=100nm		=100nm	N/A
	Apex offset	=50um
Mechanical	Exchangeability	=0.2dB
	Salt Spray	=0.1dB
	Drop	=0.2dB(1.5M, 5 drops)
	Vibration	IL =0.2dB(550Hz, 1.5mm)
	Repeatability	= 0.1dB(1000 times)
	Durability	> 1000 times
	Operating Temperature	-40? ~ +85?

 

The Basic Division of MTP® Connectors:

Type and Color Code Connectors	Insertion Loss (IL)	Optical Return Loss (RL)	Operating Temperature
Single-mode MTP® Elite® Connector	0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Single-mode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Multimode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3	> 20 dB (0°Flat Polished)2,3	-40? to 75?
1 IL test according to IEC 61300-3-4; 2 RL test according to IEC 61300-3-6; 3 Tested with proposed encircled flux launch condition on 50µm fiber & 850nm per IEC 61280-4-1.




Recommended buffer fiber and color-coded connectors:

Cable Type	Single-mode MTP® Elite® Connector	Single-mode MTP® Standard Connector	Multimode MTP® Elite® Connector	Multimode MTP® Standard Connector
Bare Ribbon	Mustard Color	Green Color	Aqua Color	Beige Color
Flat ribbon Cordage
Cable Ø 2.0mm
Cable Ø 3.0mm
Cable Ø 3.6mm
Cable Ø 4.5mm
Cable Ø 5.0mm
Cable Ø 5.5mm




Individually Plastic Bag With Testing Result:






High Density MTP®/MPO Cabling System In Dada Center:










Ordering Information:
? 1 ea for individual static-free bag with test report;
? Connector Customized Inquired;
? Cable Customized Length;

Product Description	Lengths	Wire map
24 Fiber MPO/MTP female –female, OS2	0-80 Meter	Straight A Wire
24 Fiber MPO/MTP male-female, OS2	0-80 Meter	Straight A Wire
24 Fiber MPO/MTP male-male, OS2	0-80 Meter	Straight A Wire
24 Fiber MPO/MTP female –female, OS2	0-80 Meter	Straight B Wire
24 Fiber MPO/MTP male-female, OS2	0-80 Meter	Straight B Wire
24 Fiber MPO/MTP female –female, OS2	0-80 Meter	Pair flipped C Wire
24 Fiber MPO/MTP male-male, OS2	0-80 Meter	Pair flipped C Wire