12 Fiber Optic MTP APC To MTP APC Singlemode OS2 Trunk Patch Cable Termination

Product Detail

Technical Information:
ALTEK's 12/24 f.o. MPO/MTP® Trunk cable facilitates a rapid deployment in high density environments. Used to interconnect MPO/MTP® cassettes and panels with the active equipment ports.




Benefits:
? Use to distribute some or all of the fibers in a trunk cable to other areas;
? Have pins (Male type) on one end of the connector, and no pin (Female type) on the other end;
? Choices of MPO/MTP® in 12 or 24-fiber connector interface;
? 100% tested;
? Fiber counts available in 12 / 24 / 36 / 48 / 72 / 96 / 144-fibers;
? Round & mini-core cable structure to eliminate bend sensitivity;
? Available in single-mode (9/125µm),multi-mode (50 or 62.5/125µm)and 10Gig fiber;
? Optional pulling eye design to fit for different installation environment.




General Connector Specification:











Other connectors'Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973;
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973;
FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973;
ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc.




Specifications and Dimensions:

Parameter		Single-mode			Multi-mode
Basic	Fiber connector	FC, SC, LC, ST, MU, MTRJ, MPO
	Ferrule End-face	PC	UPC	APC	UPC
	Insertion Loss	=0.2dB	=0.2dB	=0.3dB	=0.3bB
	Return Loss	=50dB	=55dB	=60dB	=35dB
	Ceramic Ferrule Specification	125.5um concentricity deviations: <=1um			127um concentricity deviations:<=3um
	Suitable Fiber	9/125um			50/125um,62.5/125um
End-face Geometry	Radius of Curvature	7~25mm		5~12mm	N/A
	Fiber Protrusion	=50nm		=100nm	N/A
	Fiber Under Cut	=100nm		=100nm	N/A
	Apex offset	=50um
Mechanical	Exchangeability	=0.2dB
	Salt Spray	=0.1dB
	Drop	=0.2dB(1.5M, 5 drops)
	Vibration	IL =0.2dB(550Hz, 1.5mm)
	Repeatability	= 0.1dB(1000 times)
	Durability	> 1000 times
	Operating Temperature	-40? ~ +85?

 

The Basic Division of MTP® Connectors:

Type and Color Code Connectors	Insertion Loss (IL)	Optical Return Loss (RL)	Operating Temperature
Single-mode MTP® Elite® Connector	0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Single-mode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1	> 60 dB (8°Angle Polished)2	-40? to 75?
Multimode MTP® Standard Connector	0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3	> 20 dB (0°Flat Polished)2,3	-40? to 75?
1 IL test according to IEC 61300-3-4; 2 RL test according to IEC 61300-3-6; 3 Tested with proposed encircled flux launch condition on 50µm fiber & 850nm per IEC 61280-4-1.




Recommended buffer fiber and color-coded connectors:

Cable Type	Single-mode MTP® Elite® Connector	Single-mode MTP® Standard Connector	Multimode MTP® Elite® Connector	Multimode MTP® Standard Connector
Bare Ribbon	Mustard Color	Green Color	Aqua Color	Beige Color
Flat ribbon Cordage
Cable Ø 2.0mm
Cable Ø 3.0mm
Cable Ø 3.6mm
Cable Ø 4.5mm
Cable Ø 5.0mm
Cable Ø 5.5mm




Individually Plastic Bag With Testing Result:






High Density MTP®/MPO Cabling System In Dada Center:










Ordering Information:
? 1 ea for individual static-free bag with test report;
? Connector Customized Inquired;
? Cable Customized Length;

Product Description	Lengths	Wire map
12 Fiber MPO/MTP female –female, OS2	0-80 Meter	Straight A Wire
12 Fiber MPO/MTP male-female, OS2	0-80 Meter	Straight A Wire
12 Fiber MPO/MTP male-male, OS2	0-80 Meter	Straight A Wire
12 Fiber MPO/MTP female –female, OS2	0-80 Meter	Straight B Wire
12 Fiber MPO/MTP male-female, OS2	0-80 Meter	Straight B Wire
12 Fiber MPO/MTP female –female, OS2	0-80 Meter	Pair flipped C Wire
12 Fiber MPO/MTP male-male, OS2	0-80 Meter	Pair flipped C Wire